A Handyman’s Guide to Re-Caulking Your Shower

The majority of experts (and any reputable handyman) agree that you ought to re-caulk your shower and tub about every 3-5 years. Old caulk can allow wetness to obtain inside your wall, triggering mildew and the wear and tear of your sheetrock. Recaulking takes a stable hand and is the best job for a local handyman. Nevertheless, if you choose to take this task on yourself, right here are the steps to take when replacing the caulk:. http://en.wikipedia.org/wiki/Caulking

1. Pre-clean the location with a bathroom cleanser/soap residue remover. Eliminate the old caulk by cutting or scraping it away with a knife or razor blade. It must remove quickly. Soften stubborn and dried caulk with industrial caulking contractors remover that allows you to more quickly scrape it away. You can also use a heat gun to warm up the caulk and make it simpler to get rid of. Work your way around the edge of the tub or shower, softening and then removing the caulk with your razor.

caulking contractors2. Vacuum up staying bits of caulk and clean the seams with rubbing liquor to get rid of caulk, soap scum, and other materials that collect in the shower’s corners. Inspect to see if there is mildew growing behind the caulk. If you have a great deal of mildew, use a mildew killer or a mixture of bleach and water to get rid of it. Let the location dry thoroughly (24 to 36 hours) prior to you start re-caulking.

3. Set strips of masking tape 1/8 inch from the joint to prevent caulk from bleeding over onto tile or walls. Position the caulk in the caulk gun and cut off the container’s idea with scissors. Depress the caulk gun’s trigger and run the caulk along the joint in a smooth, steady activity, leaving a thin bead of caulk which covers the joint completely. See to it you put on sufficient or it will not supply complete security. As you dispense the caulk, use this handyman technique and smooth it out with a damp finger. http://www.caulkandseal.com.au/caulking-contractors/

4. Once you’ve caulked all the joints, wait 30 minutes then remove the tape. Wait 24 to 48 hours prior to making use of the shower/tub. If possible, don’t use the restroom at all throughout this time. The caulk will dry better in an unused bathroom.

4. Once you’ve caulked all the joints, wait 30 minutes then remove the tape. Wait 24 to 48 hours prior to making use of the shower/tub. If possible, don’t use the restroom at all throughout this time. The caulk will dry better in an unused bathroom.